Simple Houseware Under Sink Organizer: Specs, Fit Check & Who Should Skip It
Measure your cabinet first, then match width range, depth, and pipe cutouts. Specs-only fit guide for the expandable metal 2-tier under-sink rack.
As an Amazon Associate I earn from qualifying purchases. Buying through this link may earn us a commission at no extra cost to you.
Save this fit checkCheck current price on Amazon Opens Amazon · confirm the selected variant and dimensionsSimple Houseware Under Sink Organizer
Expandable metal 2-tier rack with removable panels for pipe cutouts. Buy it when your tape measure already matches the width, depth, and height ranges below.
| Width (expandable) | 15.75–25 in |
|---|---|
| Depth × height | 11.75 in D × 15.25 in H |
| Tiers | 2 |
| Height levels | 4 |
| Removable panels | 7 |
| Load rating | =22 lb per tier |
| Material / finish | Metal, powder-coated; silver |
| Weight | 4.7 lb |
| Feet | Anti-slip |
Specs from Amazon listing, verified September 5, 2026.
Tape measure before checkout
Measure first. Then decide.
Use a tape measure inside the cabinet, not on the door face.
Clear interior width.
Measure left wall to right wall at the height where the rack will sit. Note the narrowest point if pipes or hinges steal space. The Simple Houseware unit expands from 15.75 to 25 inches wide. If your clear width is under 15.75 inches, this frame will not fit. If you need more than 25 inches of span, it will not bridge the full bay.
Depth from the door plane back.
Measure from the inside of the closed-door line to the back wall (or to the farthest obstruction). Listing depth is 11.75 inches. If your clear depth is shorter, the rack will either stick past the door plane or sit too far forward to close cleanly.
Height under the sink basin.
Measure floor (or liner) to the lowest part of the basin, disposal, or supply lines. Listing height is 15.25 inches, with four height levels on the posts so you can step the shelves down. Leave room for bottles you actually store on the top tier.
Pipe and disposal cutouts.
Sketch where the drain, shutoffs, and disposal sit. This rack uses seven removable panels so you can open a gap around plumbing. If your layout is heavily L-shaped around a disposal and pull-out, an L-shaped frame may be the better fork (see below).
Door swing and soft-close hardware.
Open both doors fully. Soft-close dampers and thick frames eat edge width. Re-check your clear width with the doors in their real open position.
Write the five numbers down. If any one fails the listing range, skip this SKU and look at the forks.
A closer look
One pick. 6 views.
Most under-sink racks fail for one reason: they were bought before anyone measured the cabinet. Width looks fine in a photo. Then the doors close against a drain pipe, the rack hits the U-bend, or the expandable frame never opens far enough to clear the plumbing.
This is a specs-first fit check for one expandable metal 2-tier design: the Simple Houseware under-sink organizer. Measure first. Match the numbers. Then decide if this shape is for you — or if you need a different fork entirely.
How the expandable frame and panels work
This is a two-tier metal rack with a powder-coated silver finish. The width span is adjustable: you pull the frame out until it matches your cabinet, within 15.75–25 inches. Height posts offer four levels, so you can set shelf spacing around taller bottles on the bottom and shorter ones above.
The seven removable panels are the pipe workaround. Pull panels where the drain or supply lines pass through; leave panels where you need a flat shelf. That is the entire fit mechanism — not magic clearance, just configurable gaps.
Load rating on the listing is at least 22 lb per tier. Empty weight is about 4.7 lb. Feet are anti-slip. None of that rescues a cabinet that is too narrow, too shallow, or wrapped around a disposal the panels cannot clear.
Only if this pick doesn’t fit
When to fork to a different shape
Disposal or pull-out crowding the center. If the drain and disposal sit dead-center and eat a big L of floor space, a straight expandable bay may fight you even with panels removed. Look at an L-shaped under-sink frame such as the REALINN L-shaped organizer (Amazon listing B0C5DBMYZF) — still measure depth and height; the shape is the reason to switch, not a guarantee of fit.
Shallow vanity or bathroom cabinet. If depth is the limiter and you do not need metal load capacity, a plastic expandable shelf like Spicy Shelf (Amazon listing B07YF4HJKP) is the shallow-vanity fork. Different material, different load story — use it when the cabinet is shallow, not when you need a kitchen under-sink workhorse.
Tagged links above are optional outbound checks only. The shortlisted pick remains Simple Houseware when your measurements already match.
The bottom line
Let the fit decide.
Measure width, depth, height, and pipe locations first. Match the expandable metal rack only when those numbers fit. Skip it for tight disposal layouts or shallow vanities, and use the L-shaped or plastic forks instead. Specs decide this category; photos do not.
Check current price on Amazon Confirm fit, variant, and included parts before buying.